Description
Paper designed for transferring images onto light-colored fabrics. Designed for use with inkjet printers. Resolution up to 2880 dpi. Images are transferred using a household iron or a heat press. Transferred images maintain high quality even after 50 washes.
Step one: If the rounded corner is at the bottom left, the printing side is facing up.
Step two: Print the image in mirror mode.
Step three: In your printer settings, select transfer paper or the highest quality paper setting.
Step four: If ink bleeds during printing, reduce the color contrast.
Step five: Allow the ink to dry for approximately 30 minutes.
Step six: For the best results, use cotton fabrics.
Step one: Place a cotton cloth on a flat, hard surface, then place the T-shirt or other material for the transfer on top.
Step two: Use a craft knife or scissors to cut out the printed image along the contour, leaving a 5 mm margin from the edge.
Step three: Place the cut-out image face down on the ironed cotton surface.
Step four: Iron the image using the maximum heat setting with circular motions, applying maximum pressure to ensure even heat distribution.
Step five: Remove the checkered paper backing from the image 10 minutes after ironing.
Step six: Iron the transferred image again after 5–10 minutes, placing the special protective paper included in the kit over it.
Recommended heat processing time for A5 size: 60–90 s; for larger formats: 90–120 s.
Step seven: Carefully remove the protective paper.
If you wish to transfer images to both sides of the material, first transfer all images to one side. Then, without removing the protective paper, flip the material and transfer the image to the other side.
Once finished, remove the protective paper.
PLEASE NOTE:
Wash the fabric with the transferred image at a temperature no higher than 40°C.
Do not use bleach.
When ironing the image area after washing, you must place the protective thermal paper over it.
Do not use the steam function while ironing.
